Mudcutter Max Replacement Wire MT-04-03-R A straight replacement wire for the Mudtools Mudcutter Max.
Standard Green Mudwire MT-06-01 A braided stainless steel cut off wire about 38 cm (15 in) long with polymer handles, sized for a standard wheel head.
Heavy Black Mudwire MT-06-03 A heavier gauge braided stainless cut off wire about 43 cm (17 in) long, for big jobs and groggy clay.
Curly Mudwire MT-06-04 A coiled stainless steel cut off wire that leaves a rippled pattern as it passes through clay.
White Finishing MudSponge MT-07-04 The white sponge has the tightest cell structure of the three, so grit stays on the surface rather than lodging in it. That is what makes it a finishing sponge: it wipes a leather-hard or bisque surface without dragging picked-up grog back across the work.
Blue Workhorse MudSponge MT-07-05 The blue sponge is the general-purpose one, cut to a rib profile so it sits flat against a wall instead of bunching in the hand. Open cells take water up quickly and give it back under light pressure.
Orange Absorbent MudSponge MT-07-06 The orange sponge holds the most water of the three, which is the point of it: on the wheel you want a sponge that carries enough water to finish a pull and enough capacity to lift slurry out of a base afterwards. It gives water back readily, so it is the wrong sponge for a final wipe where you want the surface left dry.
Do-All Trim Tool MT-12-01 A double ended metal trimming tool with a sharpened spade at one end and a curled end at the other, made to handle most trimming on its own.
Hake Brush, 25 mm (1 in) P-20#01 A 25 mm (1 in) wide hake brush on a flat wooden handle, for laying broad even coats of glaze, slip or underglaze.
Precision Applicator, 3 oz PA3OZ A soft rubber bulb applicator holding 84 ml (3 oz), with four interchangeable metal tips for fine lines of slip, glaze or wax resist.
Trimming Tool Set PSTS3T A set of three double-ended stainless steel trimming tools (XST17, XST18, XST19), each with a different blade at each end.
Relyef Roller Handle RD003 A Relyef roller handle that holds one 14 mm texture roller, so you can swap patterns in seconds.
Roller Handle RH-1 A hardwood handle that holds any MKM small, medium or large handle roller, for running narrow patterns along rims, handles and bands.
Embossed Line Roller Set RK001 Ten embossed 14 mm texture rollers with the handle, the whole line-pattern range in one set.
Embossed Dot Texture Roller RK042 A single embossed dot texture roller, 50 mm across and 14 mm wide, for the Relyef roller handle.
Rim Rib RR An anodized aluminum rim rib with eight measuring notches, 13/64 to 7/8 in (5 to 22 mm), for measuring, compressing, smoothing and edging rims.
Bee & Honeycomb Stamp Set RR005 Four bee and hexagon stamps plus a honeycomb roller for the background.
Lithos Alphabet Stamp Set RR007 A full Lithos alphabet at 10 mm letter height, 25 letters plus a punctuation stamp.