Plainsman Clays | H555
H555 High Fire Clay
$49.32 / 20 kg (44 lb) Pugged
$0
Suggested retail price. In-store prices and availability may vary by location.
High fired, Light grey-buff burning, Smooth, Medium plastic, Vitreous, Functional, Throwing clay body, Light specking in reduction
Specifications
Type
High temperature stoneware · light grey-buff burning · vitreous · functional
Texture
Smooth and fine without being slick · medium plasticity · high green strength
Usage
Throwing · functional stoneware · reduction and oxidation firing
Temperature
Cone 9 · 10 · 10R – we recommend cone 10 (cone 10 = 1285 °C / 2345 °F). H555 fires successfully from cone 8 to cone 11 in oxidation, and at cone 10 in reduction.
Colour
Light grey-buff in reduction · buff-white in oxidation
Shrinkage
Dry 5.8–6.8% · fired 7.2–7.6% at cone 9, 7.5–7.8% at cone 10, 7.6–7.9% at cone 10 reduction
Absorption
Cone 9 1.3–1.6% · cone 10 1.2–1.5% · cone 10 reduction 0.8–1.0%
Every figure is a measured range from the Plainsman lab, not a single nominal number. Cone equivalents are Orton self-supporting cones at 108 °F/hr.
Description
H555 is a high-fire stoneware body designed for functional ware and made from a blend of refined and clean native clays. It fires vitreous – about 1% porosity at cone 10 – and performs well in both reduction and oxidation.
It is a pleasant throwing body: smooth and fine without feeling slick, and with high green strength. Its drying shrinkage is low for a high-fire body, so it dries with less cracking than most comparable bodies.
The firing atmosphere determines the colour. In reduction, H555 fires to a light grey-buff; in oxidation, it fires to a buff-white.
Working properties
- Medium plasticity, smooth and fine on the wheel without feeling slick.
- Green strength is high, so pieces handle well before firing.
- Drying shrinkage is low for a high-fire body, which means less cracking as work dries.
Fired colour & cone behaviour
- Light grey-buff in a reduction atmosphere, buff-white in oxidation.
- H555 is vitreous, firing to about 1% porosity at cone 10. It fires successfully from cone 8 to cone 11 in oxidation, and at cone 10 in reduction.
Glazes & glaze fit
- H555 does not bleed iron into a glaze or interfere with the melt, which makes it a straightforward body to glaze.
- Scattered small dark speckles can show through white and transparent glazes, most visibly where the glaze is applied thinly.
- Crazing is possible with glazes high in sodium or potassium, or short on silica or alumina. For functional ware, confirm glaze fit with a boiling-water-to-ice-water immersion test.