COH Cut Out Tool Heavy Duty, Stainless Steel Blade COH A heavy duty cut out tool with a sharp triangular stainless steel blade for thick-walled clay.
COR Cut Out Tool, Thin Double Edged Steel Blade COR A thin double-edged steel blade for thin-walled and delicate work. Both edges cut, so you can pull the stroke back without turning the tool.
CTK7 Ceramic Tool Kit, Seven Tools for Ceramists CTK7 Seven of Kemper's most-used ceramics tools in one kit: AB, SPD, SBR, COR, K23, P5D and WLS.
D4 Double Wire End Tool D4 A 152 mm (6 in) double-ended wire tool with a round loop at one end and a narrow oval at the other, for light cutting and slicing.
DBS Double Ball Stylus DBS Two ball ends on one shaft, .045 inch and .072 inch, for pressing dots and rounded impressions at two scales.
DG1 Dry Texturing Brush, Coarse, Stainless Wire DG1 Kemper's coarse dry texturing brush, with stiff stainless steel wire bristles for hard greenware.
DTA Dipping Tongs, Plated Steel DTA Glaze dipping tongs, 254 mm (10 in), with four gripping points that leave marks small enough for the glaze to close over.
F96 Soft Fettling Knife, Flexible Steel Blade F96 The flexible one of Kemper's two fettling knives, with a 102 mm (4 in) soft steel blade.
F97 Hard Fettling Knife, Tempered Steel Blade F97 The stiff one of Kemper's two fettling knives, with a 102 mm (4 in) hard tempered blade.
FCR Flower Clay Roller FCR A 127 mm (5 in) hardwood roller on a wire handle, for rolling small pieces of clay to an even thickness.
FRH Finishing Rubber, Hard Kidney FRH Kemper's larger finishing rubber in the hard grade, 108 mm (4¼ in), moulded in black rubber.
FRSM Finishing Rubber, Hard Kidney FRSM Kemper's smaller finishing rubber in the hard grade, 79 mm (3⅛ in), moulded in black rubber.
FRSS Finishing Rubber, Soft Kidney FRSS Kemper's smaller finishing rubber in the soft grade, 79 mm (3⅛ in), moulded in blue rubber.
FT451 Fleshing Tool FT451 A heavy-duty stainless loop blade with a bevelled edge and a serrated edge, on a turned hardwood handle, the wider of the two shapes.
FT453 Fleshing Tool FT453 A heavy-duty stainless loop blade with a bevelled edge and a serrated edge, on a turned hardwood handle, the narrower of the two shapes.
FTB Feather Texture Brush, Stainless Bristles FTB Fine stainless steel bristles set in a textured grip, stiff enough for short-stroke texture in small areas.
HC1 Hole Cutter for Wet Clay HC1 Cuts a clean 4.8 mm (3/16 in) hole in wet clay and thick-walled greenware. 146 mm (5 3/4 in) long overall.
HC1A Hole Cutter for Wet Clay HC1A Cuts a clean 6.3 mm (1/4 in) hole in wet clay and thick-walled greenware. 137 mm (5 3/8 in) long overall.
HC2 Hole Cutter for Wet Clay HC2 Cuts a clean 7.9 mm (5/16 in) hole in wet clay and thick-walled greenware. 127 mm (5 in) long overall.
HC3 Hole Cutter for Wet Clay HC3 Cuts a clean 12.7 mm (1/2 in) hole in wet clay and thick-walled greenware. 165 mm (6 1/2 in) long overall.
HC4 Hole Cutter for Wet Clay HC4 Cuts a clean 22.2 mm (7/8 in) hole in wet clay and thick-walled greenware. 165 mm (6 1/2 in) long overall.
HM1 Handle Maker, Forms a Strip for Pitchers HM1 Drawn through a slab, it forms a 25 mm (1 in) strip ready to cut to length and attach. Sized for a pitcher.
HM2 Handle Maker, Forms a Strip for Mugs HM2 Drawn through a slab, it forms a 19 mm (3/4 in) strip ready to cut to length and attach. Sized for a mug.
JA15 Wood Modeling Tool, Boxwood JA15 A 152 mm (6 in) boxwood modeling tool. One end is cut into four teeth, the other is a curved flat blade.