Plainsman Clays | M340S
M340S Mid Fire Clay
$37.92 / 20 kg (44 lb) Pugged
$0
Suggested retail price. In-store prices and availability may vary by location.
Mid fired, Light beige, Dark speckles, Medium to high plasticity, Silty, Throwing clay body
Specifications
Type
Cone 6 medium temperature clay body · light beige with dark speckles
Texture
Medium to high plasticity with a bit of a silty texture
Usage
Throwing · speckled, variegated glaze surfaces
Temperature
Cone 5 · 6 – like all of our medium temperature clay bodies, M340S is designed to fire at cone 6 (1222 °C / 2232 °F). Cone 7 is not recommended: over-fire M340S and bloating will occur.
Colour
Light beige with dark speckles throughout · dark grey in its pugged state
Shrinkage
Dry 7.0–7.6% · fired 4.0–4.5% at cone 5, 4.3–5.0% at cone 6
Absorption
Cone 5 3.5–4.0% · cone 6 2.0–2.4%
Every figure is a measured range from the Plainsman lab, not a single nominal number. Cone equivalents are Orton self-supporting cones at 108 °F/hr.
Description
The speckle is deliberate: 0.3% granular manganese goes into the recipe. Do not judge the colour from the bag – in its pugged state M340S is a dark grey, and the light beige only arrives out of the kiln.
The clays that make it up are all mined locally in Saskatchewan, so the body has not travelled far to reach the plant and its environmental footprint is smaller than clays that must travel.
Working properties
- Medium to high plasticity, with a bit of a silty texture to it.
- This clay does best with a limited amount of water left on the surface. Compress it, and try not to overwork it.
Fired colour & cone behaviour
- Light beige with dark specks running throughout the body.
- Like all of our medium temperature clay bodies, M340S is designed to fire at cone 6. It does not do well being over-fired – bloating will occur – so cone 7 is not recommended.
Glazes & glaze fit
- The dark specks show through most matte and glossy glazes, which is where the spotted, variegated surface comes from.
- M340S fits most glazes, but test yours with this clay to be sure of a good fit.
- For functional ware, confirm glaze fit with a boiling-water-to-ice-water immersion test.